Donut Robot® Mark II GP Automatic Donut Machine, gas, 35 lb. oil capacity, (102) dozen mini donuts per hour, gas heated with electric conveyor, adjustable frying time & temperature, includes automatic donut machine, Donut Robot® depositor, double plunger, stainless steel kettle, stainless steel & aluminum body, aluminum hopper, 40,000 BTU
- DONUT ROBOT® Mark II Gas • Mark II GP Gas
- Belshaw Adamatics Donut Robot® Mark II Gas / Mark II GP Gas Fryers deposit, fry, turn, and dispense cake donuts and mini donuts automatically. These fryers use the same cake donut depositor and the same conveyor as Donut Robot® electric models, and produce donuts of the same high quality. Training and labor requirements are low, while consistent donuts are produced time after time by a single person.
- Donut Robot® fryers have been shown to reduce oil use by up to 50% in comparison with kettle fryers. In addition, Donut Robot® fryers are fun to watch and are sure to attract passers by – generating foot traffic and impulse buys.
- The Donut Robot® fries each donut for the same amount of time, producing donuts that are nearly identical. Donut size is adjustable within a generous range. Frying time and shortening temperature can also be adjusted to suit the product.
- Models are available for natural gas or propane (specify when ordering)
- MODEL SELECTION
- For standard size donuts: Donut Robot Mark II Gas
- For mini donuts: Donut Robot Mark II GP Gas
- For standard size donuts AND mini donuts: Donut Robot Mark II Gas with Mini Donut Hopper/Plunger Kit, Item #MK-1502-1
- YEAST RAISED DONUTS
- The Donut Robot® Mark II Gas makes excellent yeast-raised donuts with the addition of accessories including FT42 Feed Table, Proofing Trays, and Proofing Cloths.
- STANDARD FEATURES
- Automatic cake donut depositor, synchronized with fryer conveyor
- Stainless steel materials with some aluminum components
- On Mark II Gas, Plain donut plunger, 1-9/16" diameter. Deposits 2 standard size donuts per conveyor row.
- On Mark II GP Gas, double 1" diameter plunger. Deposits 4 mini donuts per conveyor row.
- Stainless steel conveyor with flight bar system for advancing donuts
- On Mark II Gas, the conveyors flight bars are spaced 3¾" from center to center. Flight bars are round, 3/8" diameter.
- On Mark II GP Gas, the conveyors flight bars are spaced 3" from center-to-center for mini donuts. Flight bars are 3/8"diameter.
- Aluminum hopper with 10 lbs batter capacity
- Batter weight adjustment dial - allows variation from small to large donuts
- Automatic turning of donuts mechanically synchronized with fryer
- Automatic dispensing of fried donuts onto collection device such as Roto-Cooler
- Frying time dial sets frying times from approximately 55 to 360 seconds
- Temperature adjustment (thermostat)
- High temperature limit switch – cuts gas and electricity at approximately 450°F
- Half-speed switch that reduces automatic cake donut deposits to 1 donut per conveyor row instead of 2. For GP models, 2 per row instead of 4.
- Not compatible with Belshaw Adamatics Insider Clean Air Ventless Cabinet
- No drain is included use optional accessory Filter-Flo Siphon
- OPTIONS
- For Mark II Gas: 1-9/16" Star Plunger. Makes ring donuts with a star shape around the center hole.
- Mini donut conversion kit (Item#MK-1502-1). This kit includes mini donut hopper and double plunger, for depositing 4 mini donuts per conveyor row (as used on GP model). Changeover from standard to mini donuts and back again takes less than one minute.
- VENTILATION AND FIRE SUPPRESSION
- Customer is responsible for installation of ventilation hood and/or fire suppression as required by local codes.
- Manufacturer: Belshaw Adamatic
- Model: MARK II GASGP
- Length: 41"
- Depth: 30"
- Height: 30"
- Shipping Weight: 250 lbs in two cartons
One year parts and labor